asenware fire alarm smoke detector

9.0 kg Dry Chemical Powder ABE Fire Extinguisher
Certified and approved to AS NZS 1841.5 with a test pressure of 35 bar and operating pressure of 15 bar.

• The Manual call points  are high reliability and easy installation.
• Available for flush or surface mounting
• Suitable for most conventional fire alarm system

Our 5KG CO2 Fire Extinguisher (Carbon Dioxide) is used on class B (Flammable Liquid) & E (electrical) fires. Because it is a gas, it has little to no cleanup and will not cause damage to the equipment. CO2 fire extinguishers are come in a variety of sizes and made with light weight steel cylinders.

• Operating voltage: 9VDC(with battery 6F22)
• Operating current: monitoring status≤8uA, alarm status≤20mA
• Operating temperature: -10℃～55℃，Relative humidity: ≤95%(non-condensing)
• Protection class: IP20
• Application: For indoor use only
• Smoke Alarm Sensitivity: 0.18 to 0.26 dBM
• Alarm Level: ≥85dB@3m and ≥93dB@1m
• Materials and colors: ABS, white
• Size: 105mm*105mm*43mm
• Weight: about 130g

Can be used in mains, battery or solar power applications, providing convenient, versatile livestock control.

Powers up to 90 acres / 36 ha (60 km) of fence
6 J maximum output energy (9 J stored energy)

•  Equipment operation stable & reliable
• Easy to install & wire
• Equipment has also issued two kinds of sound and flash an alarm signal, even people with disabilities can be a timely response to evacuate.

fire alarm cable is available at www.affrosonicsystems.com

• 100 meters roll
• 1.5mm

• Red keyguard box for safe key monitoring
• Status switch N/O and N/C for connection to fire panel
• Breakable plastic tabs allow monitored access to emergency keys
• A non-hazardous breakable plastic tab cover for areas where glass is not suitable (kitchens, schools etc.)

• Adopt the two-wire or the four-wire system wiring method
• The main line end receives two main lines, No polarization
• Connect the power end to DC24V power line

The AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2＆4 standard.

The AW-CFP2166 series 2 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.