conventional fire strobe sounder

fire alarm cable is available at www.affrosonicsystems.com

• 100 meters roll
• 1.5mm

• Red keyguard box for safe key monitoring
• Status switch N/O and N/C for connection to fire panel
• Breakable plastic tabs allow monitored access to emergency keys
• A non-hazardous breakable plastic tab cover for areas where glass is not suitable (kitchens, schools etc.)

Our 5KG CO2 Fire Extinguisher (Carbon Dioxide) is used on class B (Flammable Liquid) & E (electrical) fires. Because it is a gas, it has little to no cleanup and will not cause damage to the equipment. CO2 fire extinguishers are come in a variety of sizes and made with light weight steel cylinders.

fire hose reel of 30metres / 100ft long are used to carry water to fight fires in or outdoors

Dry chemical extinguishers put out fire by coating the fuel with a thin layer of dust, separating the fuel from the oxygen in the air. The powder also works to interrupt the chemical reaction of fire, so these extinguishers are extremely effective at putting out fire.

9.0 kg Dry Chemical Powder ABE Fire Extinguisher
Certified and approved to AS NZS 1841.5 with a test pressure of 35 bar and operating pressure of 15 bar.

The AW-CFP2166 series 2 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.

16 zones fire alarm panel AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision.

AW-FTP2016 (16 zones) fire telephone panel is a new fire special communications equipment, when the fire accident, which provides a convenient means of communication, the fire control and alarm systems necessary communications products. Wall-mounted structure is easy to install, suitable for small systems.

4zones fire alarm panel Asenware Conventional Fire Panel, AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of the conventional fire alarm system, designed for applications requiring smoke detectors, bell, manual pull stations, and sprinkler supervision.

‘Standard’ fire resistant cables are required to achieve at least 30 minutes circuit integrity when tested in accordance with BS EN 50200 AND also to BS EN 50200 ANNEX E. ‘Enhanced’ fire resistant cables are required to achieve at least 120 minutes when tested to BS EN 50200 AND also BS 8434-2. The Prysmian fire performance cable range includes FP100, FP200 GOLD, FP400, FP PLUS and FP600s.

0.8mm fire alarm cable are multiconductor electronic cables with fire-rated protection. These products have multiple applications and variations that designate where a type of wire is installed.