fire alarm stand alone heat detector

•  Equipment operation stable & reliable
• Easy to install & wire
• Equipment has also issued two kinds of sound and flash an alarm signal, even people with disabilities can be a timely response to evacuate.

• Operating voltage: 9VDC(with battery 6F22)
• Operating current: monitoring status≤8uA, alarm status≤20mA
• Operating temperature: -10℃～55℃，Relative humidity: ≤95%(non-condensing)
• Protection class: IP20
• Application: For indoor use only
• Smoke Alarm Sensitivity: 0.18 to 0.26 dBM
• Alarm Level: ≥85dB@3m and ≥93dB@1m
• Materials and colors: ABS, white
• Size: 105mm*105mm*43mm
• Weight: about 130g

fire hose reel of 30metres / 100ft long are used to carry water to fight fires in or outdoors

9.0 kg Dry Chemical Powder ABE Fire Extinguisher
Certified and approved to AS NZS 1841.5 with a test pressure of 35 bar and operating pressure of 15 bar.

Our 5KG CO2 Fire Extinguisher (Carbon Dioxide) is used on class B (Flammable Liquid) & E (electrical) fires. Because it is a gas, it has little to no cleanup and will not cause damage to the equipment. CO2 fire extinguishers are come in a variety of sizes and made with light weight steel cylinders.

• 12V/4-wire Operation with Alarm Relay: 4W
• Conventional Fire 10V-30V Operation
• Suitable for fastest detection for wide range of fires

fire alarm cable is available at www.affrosonicsystems.com

• 100 meters roll
• 1.5mm

two core fire alarm cable 1.0mm is designed to resist the spread of fire into a new area. Fire-resistant or fire-rated cables are designed to maintain circuit integrity and continue to work for a specified period under defined conditions. Two core, 100m per roll.

• Adopt the two-wire or the four-wire system wiring method
• The main line end receives two main lines, No polarization
• Connect the power end to DC24V power line

• The Manual call points  are high reliability and easy installation.
• Available for flush or surface mounting
• Suitable for most conventional fire alarm system

16 zones fire alarm panel AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision.

AW-FTP2016 (16 zones) fire telephone panel is a new fire special communications equipment, when the fire accident, which provides a convenient means of communication, the fire control and alarm systems necessary communications products. Wall-mounted structure is easy to install, suitable for small systems.